DC solenoid on 1 1/2 in. in-line valve - DIG 305DC-150

by DIG
$99.99

305DC In-line Valves with DC Actuator

DIG’s S305DC series plastic globe valves with 7- 12 VDC, 2-way magnetic latching solenoid ranged from ¾” to 2” and are operate with our two, four and six stations battery operated controllers and with the LEIT 2ET solar powered controller. The S305DC series of globe valves are heavy duty, plastic in line control valves constructed of weather resistant, high impact, glass-reinforced nylon and a stainless steel spring to provide superior hydraulic performance with balanced opening and closing at a pressure rated up to 150 PSI.

 

Specifications

  • Type: globe valve with two-way magnetic latching solenoid
  • Operating pressure: 10 to 150 PSI, (.7 to 10.5 bar)
  • Body style: globe
  • 3/4", 1", 1.5" and 2" NPT female inlet and outlet
  • Operating flow range: 
    • 3/4": .1 to 28 GPM (.23 to 6.4 m3h)
    • 1": .2 to 35 GPM (0.45 to 8 m3h)
    • 1.5": 20 to 132 GPM (4.5 to 30 m3h)
    • 2": 30 to 160 GPM (6.8 to 36 m3h)
  • Solenoid: 7 12 VDC, 2-way magnetic latching, normally closed, bi-directional pulse
    • Voltage rate: 6.5 -12 VDC
    • Coil Resistance: 4.7Ω +/- 0.3
    • Pulse Width: minimum 10 mSec
  • Operation mode:
    • Red + and white – latch to open
    • Red – and white + released to closed
  • Control orifice: 0.65 +/- 0.0002 (1.7 mm)
  • Lead wires: 18” (45 cm) UL 1015, AWG 16, 300V - red and white wires
  • Temperature range: up to 150 Fahrenheit (0-65 C) 

Dimensions:

  • Valve dimensions: 3/4" and 1": 4.5" H x 4.25" L x 3.12" W, (11.5 cm H x 11 cm L x 8 cm W) 
  • Valve dimension: 11/2": 7.12" H x 6.12" L x 5.75" W, (18 cm H x 16 cm L x 14.5 cm W)
  • Valve dimension: 2": 8.5" H x 6.12" L x 5.75" W, (21 cm H x 16 cm L x 14.5 cm W)
  • Solenoid dimension top: 3.1" (7.9 cm) L X 1.18" (3.0 cm) D 
  • Solenoid dimension bottom: 3.1" (7.9 cm) L x 1.18" D (3.0 cm) 
  • Valve solenoid thread housing: 3/4”-20 UNES-2A 
  • Adapter thread: 11/16”-12 UN female thread X male ¾”-20male thread 
  • Solenoid thread: 11/16”-12 UN 
  • Material: 
    • Valve body and cover: Glass reinforced nylon
    • Diaphragm: Nylon fabric reinforced polyisoprene (NR)
    • Metal parts and screws: Stainless Steel 303 and 430F
    • Solenoid actuator body: Glass reinforced nylon
    • Solenoid actuator plunger rubber cap: EPDM 80