DRIP IRRIGATION ALL

6-outlet Adjustable Drip Manifold Converts an existing 1/2" sprinkler riser to a 6-outlet, high flow, adjustable drip system; flow rate 0 to 20 GPH...

PROVIDE WATER PRECISELY WHERE NEEDED Secure and exact! Flow rate directly correlates to incoming pressure rate. Attached directly to 1/8" distribu...

Connect 1/4" tubing, mainline lateral tubing runs Fits all brands of 1/4” micro tubing , 1/4" drip line and 1/4" soaker hose with .140 ID to ...

1 GALLON PER HOUR EACH OUTLET - 12 OUTLET MANIFOLD COLOR CODE : RED The TOP twelve outlet drip irrigation manifold head with ½ inch FPT utilizes ex...

Connect 1/4" tubing, mainline lateral runs etc. NEARLY HALF THE COST OF THE COMPETITION! Barbed Drip Fittings are used in the installation of all ...

The compact size makes the Micro-line™ dripline ideal for a wide range of applications. For commercial and residential uses, the Micro- line™ dripl...

1/4 in. Porous Soaker Hose DIG's PSH50 Porous Soaker Hose is an extruded small-diameter flexible pipe made of UV-resistant recycled rubber from old...

2.2 GALLON PER HOUR EACH OUTLET - 12 OUTLET MANIFOLD COLOR CODE : GREEN The TOP twelve outlet drip irrigation manifold head with ½ inch FPT utilize...

Keeps low-flow drip irrigation watering tubing lines where you want them Durable plastic support stakes, keeps tubing and emitter exactly where yo...

16 and 17 mm (1/2") Barbed Fittings The brown 1/2” Barbed Drip Fittings are used in the installation of DIG’s brown PC™ drip line with 18" spacing ...

Backflow Preventer DIG's 3/4" backflow preventer keeps contaminated water from re-entering the household/municipal water supply lines. The backflow...

25-PACK DRIP COUPLINGS - Max Pressure 30PSI Barbed ends grab tubing for a secure leak-proof connection Allows creation of a custom layout for your...

1/8" & 1/4" Poly Micro Tubing DIG’s ¼ inch blank polyethylene distribution tubing is available in several colors and in lengths of up to 3000’....

Universal Nut-lock Fittings DIG’s Universal Nut Lock™ Drip Fittings are used to connect drip tubing and drip line with dimensions from 1/2” to 5/8”...

.450 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

.450 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

.450 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

1/2" Blank Polyethylene Drip Tubing Brown 1.200 OD DIG polyethylene drip tubing is design to meet all installation requirements for drip irrigation...

Flag Drip Emitters  The flag drip emitters, available with flow rates of 1, 2 and 4 GPH, have a side barbed outlet for extending 1/4" distribution ...

In-line Drip Emitters DIG’s innovative In-line Button Drip Emitters provide flexibility and simplify the installation and customization of resident...

Aids in turning 1/4" micro tubing around sharp corners HALF THE COST OF THE COMPETITION! Barbed Drip Fittings are used in the installation of all ...

DIG’s LEIT 1™ ASV single-station ambient light (solar) powered controller with a two wire DC latching solenoid is available mounted on a ¾” or 1” h...

½” FPT X .700 OD Sprinkler Riser to Drip Conversion Tee Kit with .700 OD The ½” FNPT X .700 OD Sprinkler Riser to Drip Conversion Kit model SRC-25-...

DIG’s Maverick™ Twelve-Outlet Drip Kits are used to retrofit an existing ½” sprinkler riser into a twelve outlet drip irrigation system without alt...