DIG TOP-005 - .6 GPH 12 Outlet TOP Irrigation Bubbler Manifold Water E — onestopoutdoor.com

DIG TOP-005 - .6 GPH 12 Outlet TOP Irrigation Bubbler Manifold Water Emitting Fits 1/4 Tubing

by DIG
$11.10

NEED A LARGE QUANTITY? CONTACT US FOR A QUOTE!  PURCHASING@ONESTOPOUTDOOR.COM

The TOP twelve outlet drip irrigation manifold head with ½ inch FPT utilizes extremely accurate pressure compensating individual and interchangeable drip emitters to ensure equal flow from each outlet over a wide range of operating pressures from 10 to 80 PSI.

 ***PLEASE NOTE: THIS INCLUDES ADAPTERS TO FIT 1/4” TUBING (.150 - .160 ID) IT WILL ALSO FIT 1/8" TUBING WHEN USED WITHOUT ADAPTER BARBS.

***THIS MODEL IS THE .6GPH Flow Rate

Features

  • Constructed with 12 built-in individually pressure compensating drip emitters
  • Self-flushing emitters allow passage of water and minimize clogging
  • Interchangeable drip emitters for variable flow rates in a single head
  • Color-coded drip emitters and barbs easily identify flow rate at each zone
  • Each drip emitter individually filtered (approx. 80 mesh)
  • Backup mini-disk filter
  • Rugged materials to withstand the most adverse conditions
  • Install above grade or place below grade in a 6” emitter box
  • Inlet plugs provide the option to cap off up to eight drip emitters
  • TOP kits contain 100’ of 1/8” distribution tubing, accessories, stakes and 1/4” converter barbs allowing the use of 1/4” distribution tubing

Specifications

  • Available Flow rates: .6, 1, 2.2 and 3.3 GPH (2.2, 4, 8.3 and 12.5 L/H)
  • Pressure compensating range: 8-80 PSI (.5 - 5.6 BAR)
  • Recommended operating pressure: 15-50 PSI (1 - 3 BAR)
  • Inlet size: 1/2” FNPT
  • Use with 1/8” (.187 OD) or 1/4” (.150 - .160 ID) distribution tubing
  • Materials:
  • Body and cover: high impact plastic
  • Filter: nylon
  • Diaphragm: silicon
  • Filter requirement: minimum of 120 mesh 

Dimensions

Dimensions: 3” W x 2” H (7.6 cm W x 5 cm H)

You recently viewed

Clear recently viewed