1/8" Polyethylene Distribution Tubing .187 OD 100'-1000ft'

by DIG
$3.00

1/8" & 1/4" Poly Micro Tubing

DIG’s ¼ inch blank polyethylene distribution tubing is available in several colors and in lengths of up to 3000’. The distribution tubing is manufactured of high quality low-density polyethylene resin with a minimum of 2% carbon black to protect the finished product from thermal degradation, ultraviolet stress and chemicals.

Features

  • DIG blank polyethylene distribution tubing are available in 50', 100', 500', 1000' and 3000' coils (15 m, 30 m, 150 m, 300 m, 900 m)
  • Used with drip emitters, micro-spray or micro-sprinklers in above or below grade installation
  • The 500', 1000' and 3000' coils (150 m, 300 m, 900 m) wound on a cardboard cores 
  • Extruded from the finest quality low density polyethylene resins
  • UV resistant, contains a minimum of 2% concentrated carbon black, an antioxidant that protect the tubing from thermal degradation
  • Supported by quality control standard and processes to ensure consistent coils productions
  • Exhibits outstanding environmental stress-cracking resistance and burst strength

Specifications

  • Operating pressure: up to 60 PSI (4.2 BAR)
  • Material: Dow FINGERPRINT™ DFDA-7510 NT linear low-density polyethylene resin with a minimum of 2% carbon black
  • Available in three configurations:
    • .125 ID x .187 OD (3.8 x 4.7 mm)
    • .160 ID x .220 OD (4.0 x 5.5 mm)
    • .170 ID x .250 OD (4.3 x 6.3 mm)