.5 or 1 GPH In-Line Drip Emitters (100 Pack) 06-037 - 06-036 — onestopoutdoor.com

.5 or 1 GPH In-Line Drip Emitters (100 Pack) 06-037 - 06-036

by DIG

In-line Drip Emitters

DIG’s innovative In-line Button Drip Emitters provide flexibility and simplify the installation and customization of residential drip irrigation systems. Their rate of flow depends on the inlet pressure; with higher pressure the flow will increase, with lower inlet pressure, it will decrease. The drip emitters' nominal flow rates are .5 and 1 GPH at 15 PSI. Available in packs of 10 and 25, these emitters are ideal for use in pots, baskets, planter boxes, in level systems with short runs and low pressure gravity feed systems. Install the drip emitters “in-line” as needed in any spacing with the 1/4" micro tubing as the main line.



  • Uniform flow rate at low pressure
  • 1/4" barbed inlet and outlet for installation into 1/4" micro tubing
  • Resistant to chemicals and fertilizers used in landscape applications
  • Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions
  • Color-coded to easily identify flow rate
  • The drip emitters can be installed where desired along the 1/4" micro tubing 
  • Ideal for a loop-type layout
  • Turbulent flow through a labyrinth-water-passage design reduces likelihood of clogging

Product specifications

  • Operating pressure range: 5 to 25 PSI 
  • Recommended operating pressure: 25 PSI (use with model D46 25-PSI pressure regulator)
  • Flow rates and color codes:
    • .5 GPH color code – red
    • 1 GPH color code – black
  • Inlet side: 1/4" barb
  • Outlet side: 1/4" barb
  • Filter requirement: minimum of 150 mesh 
  • Material: polypropylene

You recently viewed

Clear recently viewed