PC Drip Emitters Features The labyrinth water passage with floating silicon diaphragm design provides a self-cleaning mechanism at the water outle...

Plug 1/4" drip irrigation tubing tubing Fits all brands of 1/4” micro tubing , 1/4" drip line and 1/4" soaker hose with .140 ID to .170 ID Sh...

16 and 17 mm (1/2") Barbed Fittings The brown 1/2” Barbed Drip Fittings are used in the installation of DIG’s brown PC™ drip line with 18" spacing ...

Use to convert 1/8” (.187" OD) or 1/4” (.150" - .160" ID) distribution tubing Works with DIG TOP Manifolds : See image.   push the barb into mani...

Connect 1/4" tubing, mainline lateral tubing runs Fits all brands of 1/4” micro tubing , 1/4" drip line and 1/4" soaker hose with .140 ID to ...

Connect 1/4" tubing, mainline lateral runs etc. NEARLY HALF THE COST OF THE COMPETITION! Barbed Drip Fittings are used in the installation of all ...

Aids in turning 1/4" micro tubing around sharp corners HALF THE COST OF THE COMPETITION! Barbed Drip Fittings are used in the installation of all ...

Use to connect 2 sections of 1/4" tubing in order to direct water to another location or connect 1/4" tubing to a supply line HALF THE COST OF THE...

Keeps low-flow drip irrigation watering tubing lines where you want them Durable plastic support stakes, keeps tubing and emitter exactly where yo...

DIG’s C31B 1/2" compression PVC Insert is glued to a 1/2" PVC slip coupling or tee and is used to connect 1/2" drip tubing with .700 OD to 1/2" PVC...

.620 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

.450 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

.450 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

One Stop Outdoor (20-Pack) 1/2" Inch Professional Drip Irrigation Fitting Compression Connector Kit - 5 Couplings, 5 Tees, 5 Elbows & 5 End ...

16 mm (1/2") Barbed Fittings The brown 1/2” Barbed Drip Fittings are used in the installation of DIG’s brown PC™ drip line with 18" spacing and wit...

17 mm (1/2") Barbed Fittings The brown 1/2” Barbed Drip Fittings are used in the installation of DIG’s brown PC™ drip line with 18" spacing and wit...

.630 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

.630 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

.620 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

.620 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

.620 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

Connects / Adapts 16mm drip tubing to 1/2" MNPT Thread Pipe Special, extra sharp barb design for secure and easy installation without glue or clam...

.630 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

.450 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

1 GALLON PER HOUR EACH OUTLET - 12 OUTLET MANIFOLD ***PLEASE NOTE: THIS ONLY FITS 1/4” (.150 - .160 ID) TUBING WHEN USED WITH ADAPTER BARBS. THESE ...

PROVIDE WATER PRECISELY WHERE NEEDED Secure and exact! Flow rate directly correlates to incoming pressure rate. Attached directly to 1/8" distrib...

PROVIDE WATER PRECISELY WHERE NEEDED Secure and exact! Flow rate directly correlates to incoming pressure rate. Attached directly to 1/8" distribu...

Adjustable Drip Emitters DIG's 360° and 180° adjustable flow emitters are available with a stake or with a 1/4" barb and have a flow dial enabling ...

In-line Drip Emitters DIG’s innovative In-line Button Drip Emitters provide flexibility and simplify the installation and customization of resident...

Adjustable Bubbler DIG's Adjustable Bubbler offers adjustable flow rate and a spray diameter in a 360° gentle stream umbrella pattern, combined wit...

Adjustable Bubbler on Stake DIG's Adjustable Bubbler on Spike offers adjustable flow rate and a spray diameter in a 360° gentle stream umbrella pat...

FOR LARGER QUANTITY ORDERS PLEASE CONTACT OUR QUOTES DEPARTMENT DIRECTLY FOR DISCOUNTED PRODUCT AND SHIPPING COSTS! INFO@ONESTOPOUTDOOR.COM   1 GAL...

1" Blank Polyethylene Drip Tubing Black .600 ID x .700 OD DIG polyethylene drip tubing is design to meet all installation requirements for drip irr...

.450 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

.450 OD to .710 OD Compression Fittings  Constructed of molded ultraviolet-resistant high impact plastic, DIG's compression fittings are available ...

Universal Nut-lock Fittings DIG’s Universal Nut Lock™ Drip Fittings are used to connect drip tubing and drip line with dimensions from 1/2” to 5/8”...