DIG PN2MPT-200 - Heavy Duty 2" In-Line Screen Filter for Greenhouse, H — onestopoutdoor.com

DIG PN2MPT-200 - Heavy Duty 2" In-Line Screen Filter for Greenhouse, Hydroponics, Large Grow

by DIG

DIG Heavy Duty 2" In-Line Screen Filter for Greenhouse, Hydroponics, Large Grow

Heavy Duty 2" Screen Filter

DIG’s heavy-duty 2″ screen filter features a robust design with a large filtration area, and it supports a high flow rate. It can handle long intervals between flushing and incorporates an easily removed filter cover. The filter can accept a wide range of color-coded screen or disc elements. It is available in inline or “T” angle and used for agriculture, turf, greenhouse and nursery applications


  • Special locking ring enables easy opening of the filters without the use of tools.
  • A wide range of filtration degrees for various applications
  • Large filter area and low friction loss allows long intervals between cleaning
  • Greater filtration capacity for effective protection of the irrigation system
  • All-purpose filter with a wide range of stainless steel screens from 80 to 180 microns to suit a wide range of filtration requirements
  • Designed to reduce operating costs and deliver high quality filtrate in a minimum space
  • Made of superior strength material for excellent mechanical strength, and corrosion resistance for most common chemicals
  • Easy maintenance - the screen can be extracted from the filter for cleaning
  • Interchangeable screen with disc elements
  • Access point on the inlet and outlet side for pressure measurement test
  • Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions


  • Flow rates: up to 110 GPM (25 m3/h)
  • Screen filtration area: 147 in2 (950 m2)
  • Operating pressure: up to 150 PSI (10 BAR)
  • Temperature range: up to 140°F (60°C)
  • Stainless steel screens from 155 or 200 mesh
  • Horizontal, vertical inlet and vertical outlet
  • Available with a manual drain valve located at the bottom of the filter and with two pressure testing ports
  • Inlet and outlet size: 2" MNPT (50 mm)
  • Filter weight: 10 lb (4.6 kg)
    • Filter dimensions:
    • Thread to thread: 11" (28 cm)
    • Height of thread to bottom: 17.5" (45 cm)
    • T-filter: Height of thread to bottom: 22.8" (58 cm)
  • Filter Materials:
    • Housing and cover: PP and GF
    • Locking ring: PA and GF
    • O-ring: EPDM
    • Screen spine: PP and stainless steel
    • Pressure testing port: polypropylene
    • Pressure testing seals: natural rubber

You recently viewed

Clear recently viewed